MOOSE Z950 Bedienungsanleitung PDF herunterladen (Seite 13)

1.4 Alarm Conditions

What To Do If An Alarm Occurs

Whenever an alarm occurs, the ALARM indicator will light, the audible alarm will

sound (if applicable), and the control will communicate with the Central Station

(if this option was purchased).

WARNING

IF UPON RETURNING TO THE PREMISES, IT IS DISCOVERED THAT AN

ALARM HAS OCCURRED, DO NOT ENTER THE PREMISES. GO TO THE

NEAREST TELEPHONE AND CONTACT THE APPROPRIATE

AUTHORITIES.

To reset the alarm:

1. Enter your User Code to reset the alarm.

2. The ALARM indicator will remain lit.

If the alarm was activated through one of the "hardwire" zones, the corre-

sponding ZONE indicator(s) will also be lit, identifying the specific area that was

violated. If the alarm was activated manually by pressing one of the keys, no

zone indicators will be lit. Press the Reset (*) key to extinguish the ALARM

indicator after determining the type of alarm that occurred and area of protection

involved.

A history of the alarm condition will be stored in the control's memory and may

be recalled at any time. See "Special Features" for more information.

False Alarms

If for any reason a false alarm occurs, perform the following steps:

1. Enter your User Code. The armed light should turn off.

2. Notify the appropriate authorities of the alarm immediately.

3. Press the Reset (*) key to extinguish the ALARM light.

1 2 ... 8 9 10 11 12 13 14 15 16 17 18 ... 50 51

Keine Kommentare

MOOSE Z950 Bedienungsanleitung Seite 13